SEMI-FINISHED ALUMINIUM PRODUCTS

Raicomes, over 60 years of metal history

ALUMINIUM

For any alloy, the aluminium content is generally above 80%. 

The main properties are low specific weight, high ductility and malleability, good mechanical strength, corrosion resistance and electrical and thermal conductivity, and a silvery grey colour.

It is classified into various alloy families such as 1000 series, 2000 series, 3000 series, 5000 series, 6000 series, and 7000 series.

The most common fields of use are in the architecture and furnishing, electrical engineering and electronics, mechanical engineering, aerospace, shipbuilding, fashion and cookware sectors.

Aluminium product type

RIBBONS

SHEETS

BARS

SEMI-FINISHED ALUMINIUM PRODUCTS


  • RIBBONS

    ALUMINIUM RIBBONS


    ALLOYS

    1050 (Al99.5), 5754 (AlMg3)


    REFERENCE STANDARDS

    EN 573, EN 485


    DIMENSIONS

    Thickness from 0.30 to 4.00 mm

    Width from 5 to 1000 mm


    PHYSICAL STATUS

    Annealed O-H111, Semi-hard H24, Hard H18


    PACKAGING

    Rolls - plastic and wooden reels


    FINISHES

    Sheared or deburred edges


    SPECIAL FITTINGS

    On specific request we can equip special alloys such as 1200 (Al99.0) and 5005 (AlMg1)



    MECHANICAL CHARACTERISTICS

  • SHEETS

    ALUMINIUM SHEETS AND PLATES


    ALLOYS

    1050 (Al99.5), 5005 (AlMg1), 5083 (AlMg4.5), 5754 (AlMg3), 6082 (AlMgSi1), 7075 (AlZn4.5Mg1)


    REFERENCE STANDARDS

    EN 573, EN 485


    FORMATS AND THICKNESSES

    Dimensions from 2000x1000 mm to 3000x1500 mm

    Thickness from 0.50 to 150 mm


    PHYSICAL STATUS

    Annealed O-H111, Semicrude H24, Crude H18, Crude H32, Quenched and tempered T6


    SPECIAL FITTINGS

    On specific request, we can equip special alloys such as 2017, 6061, 7020, 7022



    MECHANICAL CHARACTERISTICS


  • BARS

    ALUMINIUM BARS


    ALLOYS

    2007-2011-2017, 5083-5754, 6060-6083, 7022-7075


    REFERENCE STANDARDS

    EN 573, EN 754


    SHAPES AND DIMENSIONS

    Round (diameter) 6 to 400 mm

    Square (side) 10 to 250 mm

    Hexagon (key) 6 to 22 mm

    Flat: thickness from 2 to 60 mm and width from 10 to 250 mm


    PROFILES

    Angles, L, T, half-round, equal base grooves, wide base grooves, narrow base grooves


We have always focused on product quality and customer satisfaction.

CERTIFICATIONS

Raicomes Metalli has quality system certification according to ISO En 9001.

client SERVICES

For years, our company has combined high product quality with various services to meet customer needs.

Find out more

Contact us

Our company is located in Castenedolo (BS), operates throughout Italy and also exports to many European countries. 

Contact us

Share by: